Assessment Validation Simplified: How to Validate Assessments

Upon receiving registration, RTOs must manage various responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, with validation being a notably arduous task.

Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.

Essentially, validation is about identifying which parts of an RTO's assessment process are effective and which need improvement. With a proper grasp of its key aspects, validation becomes less daunting.

According to Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.

We must adhere to the standards by conducting two types of validation.

The initial assessment validation ensures your RTO's assessments comply with the training package requirements.

The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.

Therefore, validation is conducted both before and after the assessment. This article emphasizes the first type: assessment tool validation.

The Fundamentals of the Two Types of Assessment Validation

The Basics of Assessment Validation

As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.

Conversely, post-assessment validation focuses on the implementation side, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

This article will focus on assessment tool validation.

Steps to Perform Assessment Tool Validation

Now that we understand the two types of validation, let’s explore the details of assessment tool validation.

When is Assessment Tool Validation Conducted?

The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Therefore, any time you obtain new learning resources, assessment tool validation should be completed before students use them.

You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.

Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:

- your resources get updated
- your scope includes new training products
- reviewing your course against training product updates
- identifying your learning resources as a risk during your risk assessment

The Australian Skills Quality Authority's risk-based approach means RTOs should carry out regular risk assessments. If students complain about learning resources, it's an ideal time for assessment tool validation.

Choosing Training Products for Validation

It's crucial to remember this validation ensures compliance of all learning resources before they are used. All RTOs should validate resources for each unit.

Essential Resources for Assessment Tool Validation

Educational Resources

Since you are validating your assessment tools, you will require the entire suite of your learning resources:

Mapping tool – the initial document to investigate. It identifies which assessment items address unit requirements, helping speed up validation.

Learner/student workbook – ensure it's appropriate as an assessment tool. Check if the instructions are clear and answer fields are adequate. This is a frequent issue.

Assessor guide/marking guide – also verify if instructions for assessors are sufficient and if clear benchmarks for each assessment item are provided. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – such as checklists, registers, and templates created independently from the workbook and marking guide. Validate them to ensure they are suitable for the assessment task and address unit requirements.

Assessment Validation Panel

Clause 1.11 outlines the criteria for validation panel members, specifying that validation can be done by one or more people. RTOs typically require all trainers and assessors to participate, occasionally inviting industry experts.

As a whole, your validation panel must have:

Vocational competencies and current industry skills relevant to the unit being validated

Recent expertise and skills in vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its updated version

Assessment validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool is advantageous for both the validation process and documentation. It aids in viewing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Simultaneously, it can serve as proof that you have validated your resources before they are used by students.

Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are available online. These tools typically have validators review the tools in their entirety to determine if they meet the principles of assessment.

Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.

A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Assessment Instructions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Checking?

As mentioned in our blog post Common Problems In Assessment Tools, it’s crucial that your assessment tools enable trainers to follow assessment principles and evidence rules.

Fundamental Principles of Assessment
Fairness – Is equal opportunity and access provided to everyone in the assessment process?

Flexibility – Are multiple options available in the assessment to demonstrate competence based on different needs and preferences?

Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?

Core Rules of Evidence

Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to ensure the learner has the required skills and knowledge?

Authenticity – Does the assessment tool prove that the work is the candidate’s own?

Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?

Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail click here to meet these requirements.

To avoid employing learning resources that leave unit requirements unmet, be sure to follow these guidelines:

Be Consistent with Your Teachings

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Carry out each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

changing nappies

bottle preparation, bottle-feeding infants, and cleaning equipment

prepare solids and feed infants

respond to baby signs and cues suitably

settle infants for sleep and prepare them

monitor and encourage suitable physical exploration and gross motor skills for the age

Having students explain the process of nappy changing for babies under 12 months old doesn’t fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.

Be Mindful of Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.

All or No Competence

Mind the lists. In the previous example, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific

Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What information can be included in a work package?

Possible answers include:

Required resources

Associated expenses

Length of activities

Appointed roles and responsibilities

When an assessment item requires multiple answers, indicate the number of answers needed from a student. This way, your assessment is reliable, and the evidence collected is valid.

The same applies to assessment items with double-barrelled questions or those requiring multiple answers simultaneously. These can confuse students and assessors, as demonstrated in the sample question below:

Name a hazard and/or environmental concern in the work area and choose the most effective hazard control hierarchy.

Possible answers can include, but are not limited to:

Weather conditions – isolating the work area, engineering controls, personal protective equipment

Work area and ground conditions – elimination, isolation, engineering controls

People – isolation, engineering, administration

Structural hazards – substitution, isolation, engineering

Chemical hazards – isolation, engineering, administration

Equipment or machinery – isolating, engineering, administration

Avoiding double-barrelled questions makes it easier for students to respond and for assessors to accurately judge student competence.

Given these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees require waiting for an audit to rectify noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.